|
| How to plant a patio pot |
| |
| |
|
Step 1
Water all the plants to be used thoroughly, preferably by standing them in a tray of water for about half an hour until the compost has absorbed plenty of water and is wet. Now add a generous layer of pea gravel, broken or crockery to the bottom of the container, this will improve the drainage and give the pot more stability.
Step 2
Part fill the container with Muti Purpose Compost. Plan where you want to put each plant by placing them in situ in their pots until you achieve the effect that you want.
Step 3
Add more compost to the container and then take each plant out of its pot and plant it into the compost. The stem and leaves of the plants should be just above soil level and all the roots should be covered with compost. Firm in gently to make sure there is good contact between the roots and the compost and water well.
Step 4
You will need to keep your container well watered to ensure that the plants survive the summer. In very hot weather it may be necessary to give your plants a larger volume of water at each watering. Move containers out of direct sunshine when the weather is too hot. Feed your plants with the easy to use slow release plant foodthat will provide them with a quality diet for up to six months from one treatment.
Tips
Soak clay pots before planting or the dry clay will absorb moisture from the compost inside. Good drainage is essential for pots and containers and especially for plastic pots that cannot breathe, stand pots on pot feet so that excess water can drain freely through the base. When adding compost to a container, leave a gap of about 3cm so that when you water you do not wash compost out of the pot. |
 |
|
|
|
|
 |
|
